AXIS MVP Quick Start Guide AXIS MVPQuick Start Guide Setup Sensors Plug in the USB-C cable in the back for both sensors: Visualization Unfold the visualization bar and lock into place: Do not apply downward force on the bar as they will bend Remove the side grommets: Using the LED strip, determine the orientation of the visualization bar (Left lane: connector on right side, Right lane: connector on left side): Place the LED strip within the front of the visualization bar: Replace grommets to hold strip in place: Placement Sensors Place sensors on the ball return cap at the arrows (between 2nd and 3rd arrow) and at the breakpoint Ensure sensors are perpendicular to the lane and level on the ball return cap: Visualization Bars Place the visualization bar behind the sensor: Plug in the LED strip connector into the sensor (closest connector spot on the sensor closest to the lane): App App Setup Ensure your Bluetooth on your iOS/Android device is on: Open up the app on your iOS/Android device: Allow any permissions that pop up: Sensors should automatically be connected: Calibration Select Flip Devices in Home if sensor readings are opposite: If arrows are off centered, change the target bias on each lane in Settings If ball location is off, change the sensor bias on each lane in Settings Back to AXIS MVP Homepage
